STIRRUP TURNING  
    INSTRUCTIONS
THE EASIEST AND BEST WAY TO TURN YOUR STIRRUPS IS TO FOLLOW THE DIRECTIONS BELOW.  THE BACK OF THE
FENDER AND ALL OF THE LAYERS OF LEATHER THAT HOLD THE STIRRUPS NEED TO BE WET WITH A SPRAY BOTTLE OF
WARM WATER.  WATER IS WHAT MAKES LEATHER "REMEMBER" - THIS IS HOW WE MOLD THE LEATHER FOR THE POMMEL
AND CANTLE, SO IT WILL NOT DAMAGE THE LEATHER.  DO NOT SPRAY THE FRONT OF THE FENDER BECAUSE THERE IS A
PROTECTIVE COATING THAT WILL PREVENT THE WATER FROM ABSORBING,  ONLY WET THE BACK AND FOLLOW THE
INSTURCTIONS BELOW
1) Remove the stirrups from the fender
2) Take a spray bottle of warm water
and spray the back of the fender
3) Continue spraying until you have
sprayed all of the layers of leather
behind the fender that hold the stirrup
4) Put the fender back on
5) Take the fender and turn
firmly with both hands until it is
actually past where you want it
set- go up and down the fender
with your hand several times to
mold the fender in the correct
position
6) Take a broomstick and place
in the stirrup to keep it in the
turned position until it is dry.  I
do both fenders at the same
time and put the broomstick
holding both fenders.  Usually
they will dry overnight, but in
cold or damp weather you may
need to repeat
Dixieland Gaited Saddles, Inc
Old Amish Craftsmanship
"Featuring the Steele Equi-Fit and Equi-Fit
Flexible Tree
"
c/o Cynthia Wright
714 County Road 492
Lexington AL,  35648
256-366-7480    
DixielandSaddles@gmail.com